AquaEdge® High-Efficiency Variable-Speed Screw Chiller 23XRV

IPLV to 0.299
Chlorine-free HFC-134a or R-513A refrigerant
Full Load kW/Ton to 0.53
Tri-rotor, positive displacement screw compressor
Hermetic compressor motor
Refrigerant-cooled (Q & R compressors) or air-cooled (P compressor), unit-mounted variable frequency drive
Low inrush current
Operation of up to 0.99 power factor
Flooded evaporator
Float valve (Q & R compressor) or EXV (P compressor)
Superior oil management/cold condenser water operation
Internally and externally enhanced 0.025 in. (0.635 mm) copper tubing
150 psig (1034 kPa) rated evaporator and condenser
SmartVu Touchscreen Control Display
Multilingual display
Demand limiting capability with Carrier Comfort Network® (CCN) communication link

Password protected extensive service menu with built-in diagnostic capabilities, troubleshooting, and corrective action recommendations for preset alarms
Alarm and alert files maintain the last 25 time and date stamped messages in memory
Configuration data backup with non-volatile memory
Refrigerant filter isolation valves
Thermistor type temperature sensor with quick connects in each water nozzle
Service contract available

Enhanced tubing, .028 or .035 in. (0.711 or 0.889 mm):
- Internally/externally enhanced copper tubing – evaporator/condenser
- Internally/externally enhanced cupronickel tubing – condenser
- Smooth bore/externally enhanced copper tubing – evaporator/condenser
- Smooth bore/externally enhanced cupronickel tubing – condenser
Wall tubes, titanium, condenser, .025 or .028 in. (0.635 or 0.711 mm):
- Internally enhanced tubes
- Smooth bore tubes
Marine waterboxes (available for heat exchanger frames 3-5 only):
- 150 psig (1034 kPa) waterbox
- 300 psig (2068 kPa) waterbox
Nozzle-in-head waterbox, 300 psig (2068 kPa)
Hinged waterboxes
Flanged evaporator and/or condenser waterbox nozzles
One, 2, or 3 pass evaporator or condenser waterside construction
Zinc anodes
100K AIC high interrupt circuit breaker with shunt trip
Analog voltmeter and ammeter with 3-phase selector switch
Shipped factory charged with refrigerant
Hot gas bypass
Full cold surface thermal insulation (except waterbox covers)
Customer factory performance testing
Export crating

LonWorks® Carrier translator
Sensor package
Separate storage tank and pumpout unit
Stand-alone pumpout unit
Soleplate package
Spring isolator kit
Refrigerant isolation valves for in-chiller refrigerant storage
Unit-mounted pumpout unit for storing refrigerant inside the chiller during servicing
Shipped fully charged

Nominal Capacity (Tons)*	Heat Exchanger Size	Length with Nozzle-in-Head Waterbox				Width		Height
		2-Pass**		1 or 3-Pass		Width		Height
		ft-in	mm	ft-in	mm	ft-in	mm	ft-in	mm
175-550	30 to 32	13-8¼	4172	14-3¼	4350	See Unit Certified Drawings		See Unit Certified Drawings
	35 to 37	15-4¾	4693	15-11¾	4870
	40 to 42, 4D	14-3⅛	4347	14-9	4496
	45 to 47, 4E	15-11⅝	4867	16-5½	5017
	50 to 52	14-4½	4382	14-10	4521
	55 to 57	16-1	4902	16-6½	5042
	A	14-1¼	4301	14-6¾	4439
	B	15-9¾	4822	16-3¼	4959

*For job specific dimensions and weight information, please contact your Carrier Sales Representative.

**Assumes all customer connections are on the same end of the chiller.